null

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

Overview

The OneFlo Autoprint Windows Service is the client service that will run on the despatch workstation to act as the printing agent for OneFlo. Autoprint communicates with the OneFlo web suite to store printer configuration and handle automatic job printing to configured label and A4 printers.

Installation Procedure

STOP

Before proceeding, take note of the following:

  • Recommendation for AutoPrint is printing at least 30 consignments per day. Are you creating at least 30 consignments per day?
  • You will require administrator access to your computer to complete this setup.



  1. Locate the username for the computer by going to Control Panel > All Control Panel Items > User Accounts
    This is where you can find the user name for the installation. This is case sensitive and will need to be entered exactly as seen here. The username can also be found in the Configure advanced user profile properties section highlighted on the left.

    Make note of this as it will be required for the installation process.

     

  2. Log into OneFlo: https://portal.oneflo.com.au > Type “/printerconfig” at the end of the URL.

    It should look like this...

    https://portal.oneflo.com.au/printerconfig/set-up

    There is also another method of reaching the printer configuration screen but this needs to be approved and activated by an account manager
    This option is found in the settings cog:

  3. You can download the installer file for Autoprint from here autoprint.application.installer.msi

  4. Locate the installer file you just downloaded, titled:  autoprint.application.installer.msi
    Often found in your Downloads folder.
    Double click this file to run through the install process.
  5. During the install process you will be asked for a token.
    Enter Token

  6. Generate the token out of OneFlo and paste it into the installer then hit next.


  7. You will now be asked for the your login credentials that we retrieved in step 1. Reminder: These should be the username of the login that will be using Autoprint
    The password is the password that is used to log into the computer. Enter them in to complete the installation process.
    autoprint_servicelogin

  8. Once the installation is complete, click on Config Printers in the AutoPrinting set-up to assign the printers that will generate the labels & connotes.


    Here you can choose the default label printer and the connote printer (A4).


    Click on SAVE to finish the setup.

    To commence consigning, click on Consignments > Create Outbound to commence consigning (with AutoPrint flag turned on by default).


If at any stage you do not want to print the label automatically, you can turn off AutoPrint using the check box located under the SAVE button. This will show the labels and connotes in a PDF pop up window





  • No labels