null

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

  1. Calibrate the printer, through one of two methods;

    1. When on site, facing the printer

      1. Press and hold the feed button until you see 4 (four) consecutive flashes

      2. The printer will print a couple of labels and stop.

      3. Perform a test print and validate result.
        OR

    2. Remotely (this may require elevated privileges)

      1. Go to Devices and printers

      2. Right click on the printer in question and select Printer properties


INSTALLING A ZEBRA GK420D ON WINDOWS

Additional Documentation

  • No labels